制砂機系列Sand Maker

當前位置:首頁>>產品中心>>制砂機系列Sand Maker

制砂機(GPR立式沖擊破)(Sand Maker)

作者: admin 時間:2021-06-29 07:56:11 來源:
摘要:大家都知道近兩年砂價猛漲,有客戶問我們:反擊式破碎機也屬于沖擊破碎類的機械,貴公司生產的制砂機的別名也叫沖擊式破碎機,反擊破的出料粒度可以調節,我需要制砂時,我把...
制砂機(GPR立式沖擊破)(Sand Maker)

GPR制砂系列


 

針對砂石市場對規?;?、集約化、節能環保以及高品質機制砂的需求增加,恒基重工在數千臺沖擊破制砂整形應用技術基礎上,進一步對沖擊破的結構和功能進行優化設計,推出了新一代高效率低成本的制砂整形設備---GPR系列立軸沖擊式破碎機(又稱制砂機)。

產品特點:更低的維護成本,更長的易損件壽命,更大的處理能力

進料粒度:0-50mm

生產能力:50-580噸/時

適用物料:花崗巖、石英、玄武巖、河卵石、石灰石、白云石等

工作原理

GPR立軸式沖擊破(又稱制砂機)擁有兩種進料模式,全中心進料:物料落入進料斗,經中心進料孔進入高速旋轉的轉子后被充分加速并經發射口拋出,首先與反彈后自由下落的一部分物料進行撞擊,然后一起沖擊到周圍的渦流腔內的渦狀料襯上(或反擊塊上),先被反彈到破碎腔的頂部,后偏轉向下運動,與從葉輪流道發射出來的物料撞擊形成連續的物料幕,末了經由下部排料口排出。 中心進料伴隨環狀瀑落進料:物料落入進料斗,再經環形孔落下,被散料盤分成兩股。一股經分料盤進入高速旋轉的葉輪,另一股從分料盤的四周落下,進入葉輪的物料,在葉輪內被迅速加速后高速拋出,首先與散料盤四周自由落體的另一部分物料沖擊破碎,然后一起沖擊到周圍的渦流腔內的渦狀料襯上(或反擊塊上),先被反彈到破碎腔的頂部,后偏轉向下運動,與從葉輪流道發射出來的物料撞擊形成連續的物料幕,末了經下部排料口排出。

 

 


GPR Sand Maker

Due to the increasing market demand for the scale, intensification, energy conservation, environment protection and high-quality machine-made sand, HENGJI, a Chinese professional sand maker manufacturer, further optimizes the structure and function of traditional vertical-shaft impact crushers and launches a new generation of sand-making and reshaping machine with high efficiency and low costs --- GPR Vertical-shaft Sand Maker.

Product Features: Lower maintenance costs, longer service life of vulnerable parts, bigger capacity

Input Size: 0-50mm
Capacity: 100-580T/H
Material: Granite, quartz, basalt, pebble, limestone, dolomite, etc.

Working Principle

GPR Vertical-shaft Impact Crusher (also known as “Sand Maker”) has two feed modes – “feed at center” and “feed at center & sides”. As for the former mode “feed at center”, materials at the feed hopper firstly pass through the central hole into the high-speed spinning rotor. In the rotor, materials are fully accelerated and thrown outwards from the launching port to collide with a part of materials that freely fall after rebound. Next, materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. Finally, finished products are discharged from the bottom discharge opening. As for the latter mode “feed at center & sides”, firstly, materials at the feed hopper pass through the circular hole. Then, materials are divided into two parts by the distributing tray. One part of materials enter the high-speed rotating impeller while the other part of materials fall from all sides of the tray. Materials in the impeller would be accelerated rapidly and thrown outwards at a high speed to collide with materials falling from all sides of the tray. Next, all materials hit the surrounding vortex material liner (or the impact block) inside the vortex chamber together. In the chamber, materials are bounced to the top of crushing chamber firstly and then change their direction by moving downwards to form a material curtain with materials emitted from the runner of impeller. Finally, finished products are discharged from the bottom discharge opening.
 

產品參數Product Parameters

型號Model 制砂
Sanding making
整形
Reshaping
制砂
Sanding making
整形
Reshaping
主軸轉速(r/min)
Spindle speed(r/min)
功率(kw)
Power (kw)
產品粒度D50(mm)
軟、硬、極硬
Product size D50 (mm)
Soft, hard, extremely hard
最大進料粒度(mm)
Maximum feeding size (mm)
通過量(t/h)
Throughput (t/h)
GPR7000 45 45 80-280 80-280 1200-1800 132×2 6.0 8.2 11.0
GPR8000 45 45 188-380 188-380 1200-1800 160×2 6.5 8.4 11.5
GPR8500 45 45 230-400 230-400 1200-1800 200×2 6.5 8.4 11.5
GPR9000 45 45 275-450 275-450 1200-1500 250×2 7.5 9.5 12
GPR9500 45 45 290-500 290-500 1300-1700 280×2 7.5 9.5 12

Note:

1.The bulk specific weight is calculated by 1.6t/m³. When the width of the feeding port is above 600mm, it is a large-scale machine while when the width ranges from 300 to 600mm, it is a medium-sized machine.

2.Product pictures and parameters about models, data, performances and specifications on this website are for reference only. There is a chance that HENGJI may make changes on above-mentioned information. For specific messages, please refer to the real objects and user manuals. Without special instructions, HENGJI keeps the right to explain all data involved in this website.


聯系我們
Contact
聯系我們
我們很想聽到您的聲音

400電話:4001360076

手機號碼:18908682420

客服QQ:

Email:hbhjkj@ezhjzg.com

地址:湖北省鄂州經濟開發區杜山工業園循環路西側500米

[向上]?
在線客服

在線咨詢

在線咨詢

在線咨詢

咨詢電話:
4001360076
二維碼

官方微信掃一掃

亚洲第一区欧美国产不卡综合